Tile flooring is timeless and may come with different designs, which are easy or those that are unique to every homeowner.
Since tiles are water-resistant, Metro Tile experts say that stone, porcelain, or ceramic tile flooring may give your home long-wearing durability and an attractive look.
This is particularly true in high-traffic places, like recreation rooms where stains are common, or bathrooms and kitchens with moisture.
If you have the installation skills and want to install tiles in your house, there are several steps you may follow. Some of these steps include:
1. Choose the Right Material
Tiles are among the most common materials used in bathroom and kitchen renovation, specifically because of their cost-saving potential as well as the capability to rejuvenate rooms with beautiful textures, patterns, or colors.
As far as choosing the kind of tile you need is concerned, it might be a challenging decision to make, with vast materials, each with its pros and cons.
It is also important to think of where you will be applying your tiles when choosing. For instance, your kitchen and hallway will need tiles with durable material as they have too much footfall.
2. Clean the Surface and Gather the Tools
In order for the grout and mortar to stick, you will need to clean the surface. You may use a sponge and a mix of mild dish soap and water to wipe the stains away.
You may want to spend time in places behind your stove because there can be more grease. In addition, use a paint deglosser on the lint-free cloth so as to remove difficult stains.
While at it, gather the necessary tools suitable for the job. There are many tools you can gather. The most common tools you may need are:
- Tape Measure
- Tile Spacers
- Tile Saw
- 1/8 inch V-Notch Trowel
3. Prepare the Surface for Tiling
If you are tiling a backsplash in your kitchen, ensure you apply the tiles over clean and leveled drywalls because sinks are not regarded as wet places, such as showers, which need a backer board.
Plus, remember that using the right mortar and trowel is important to have a successful tiling project.
4. Begin with Flat Surfaces
In order to achieve a great installation experience, you must ensure the substrate is flat. Knowing how to put self-leveling underlayment is important, not to mention how to skim coat products and use floor patches.
Applying different kinds of products will help a lot in repairing all minor imperfections in the substrate before installing tiles.
5. Layer the Tiles Safely
The laying technique is not that difficult. It will only require some practice so that you may master the skills.
Clearing all the rooms you want to apply tiles before you start the project may help complete the installation easily and safely.
In a Nutshell!
The cost-effectiveness, low-cost maintenance, and ease of installation make tiles one of the modern floorings finish globally.
Ceramic tiles, in particular, can outlast and outperform nearly all other flooring products, which are manufactured for the same application.